Press Brake
CNC Laser
Robot indostria
Machine Rolling Plate
Tube miondrika milina
Lathe and Machining Center
Vokatra fiarovana amin'ny milina
Air Plasma fanapahana
FEPETRA AMPIHARANA
●Vy malefaka ambany 25mm
TOETOETRA
fikirana
| CRP-RH14-10-W Welding robot | |||
| Karazana sandry | Vertical Multi - Mitambatra | ||
| Diplaoma amin'ny fahalalahana mihetsika | 6 - axis | ||
| Payload ambony indrindra | 10KG | ||
| Max. tapaka lalan-dra | Axe 1 | Eo anoloana - Mipetaka / Mivadika: - 167° - 167°, Rindrina - Mipetaka: - 30° - 30° | |
|
| Axe 2 | 0° - 175° | |
|
| Axe 3 | - 80° - 150° | |
|
| Axe 4 | - 190° - 190° | |
|
| Axe 5 | - 105° - 130° | |
|
| Axe 6 | - 210° - 210° | |
| Max. Hafainganam-pandeha | Axe 1 | 169°/S | |
|
| Axe 2 | 169°/S | |
|
| Axe 3 | 169°/S | |
|
| Axe 4 | 280°/S | |
|
| Axe 5 | 240°/S | |
|
| Axe 6 | 520°/S | |
| Torque azo avela | Axe 4 | 10N.m | |
|
| Axe 5 | 10N.m | |
|
| Axe 6 | 3N.m | |
| Torque Inertia azo ekena | Axe 4 | 0,25kg.m² | |
|
| Axe 5 | 0,25kg.m² | |
|
| Axe 6 | 0,05kg.m² | |
| Famerenana ny fametrahan-toerana | ± 0.08mm | ||
| Fahatratrarana ambony indrindra | 1440mm | ||
| Ny lanjan'ny Robot | 170KG | ||
| Fomba fametrahana | Floor - Mipetaka, Plafond - Mipetaka | ||
| Fametrahana tontolo iainana | Temperature Ambient | 0 - 45°C | |
|
| Hamandoana Relative | 20 - 80% (Tsy misy condensing) | |
|
| hovitrovitra | Latsaky ny 0.5G | |
|
| Ny hafa | Ny toerana fametrahana robot dia tsy maintsy lavitry ny: ranon-javatra na entona mora mirehitra na manimba, loharanon'ny fanelingelenana elektrika | |
| IP Rating | Vatana robot: IP54, Wrist: IP67 | ||
| Toetoetra | Compact rafitra, avo - hafainganam-pandeha, avo - mazava tsara, avo - expandability, mora ny miasa | ||
| Fampiharana Scenarios | Welding, fanapahana, fivoriam-be, fikirakirana, marika, fitotoana | ||
| CRP-E60-G4 kabinetra elektrika | |
| Mampianatra Pendant | 8-mirefy TFT - LCD, klavier + touchscreen, mode fifantenana switch, fiarovana switch, vonjy taitra bokotra fiatoana, tariby halavan'ny 6m |
| fitahirizana mpampiasa | 200M |
| Isan'ny famaky voafehy | 6 + 2 axes (6 - axis standard configuration, axes ivelany tsy voatery) |
| interface | Digital I/O Interface ， 22 - lalana fidirana / 22 - fomba fivoahana, COM azo itarina |
|
| 4 - fantsona 0 - 10V analog output, 12 - bit marina, COM azo avela |
|
| Entam-pifandraisana famantarana encoder fantsona roa (ho an'ny fanaraha-maso ny toerana) |
|
| Ethernet interface tsara |
|
| Dual USB interface tsara |
| Operation Modes | Mampianatra, playback, lavitra |
| Motion Functions | Point - to - point, linear, boribory boribory |
| Rafitra fampianarana | Hetsika, lojika, dingana, arithmetika |
| Rafitra fandrindrana | Coordinate itambarana, Fandrindrana Cartesian, mpandrindra mpampiasa, fandrindrana fitaovana, fandrindrana fototra |
| Famantarana ny tsy mety | Anomaly fiatoana vonjy maika, anomaly servo, anomaly fandrindran'ny mpampiasa, anomaly fandrindrana fitaovana, fikojakojana fiarovana, anomaly arc-start, sns. |
| Robot Safety | Fijanonana vonjy taitra ivelany, fanoherana ny fifandonana, interface tsara pin; MC fiarovana loop, servo fanalefahana, sns. |
| Natokana Interfaces voatokana | Fifandraisana manokana ho an'ny lasantsy arc, fifandraisana amin'ny toeram-piasana, fifandraisana amin'ny lafiny lavitra |
| Software Packages | Welding / fikarakarana / palletizing / hosodoko, sns (tsy voatery) |
| Ny hafa | Naorina - ao amin'ny PLC, famerenam-pahefana, encoder interface (manohana fehikibo synchronous), arc tracking sy accessories (tsy voatery), vision software (tsy voatery), laser tracking software (tsy voatery), sns. |
| Cable interconnection eo amin'ny Kabinetra sy Robot Body | 5m |
| Herin'aratra | 3 - dingana 380VAC 50 - 60HZ |
| lafiny | 550X785X410mm |
| lanja | 65KG |
| LG-125HA Machine welding | |
| Fomba fanaraha-maso | On-off Control |
| Naoty Input Voltage/Phase Number | 3 - dingana 380V AC ± 10%, 50HZ |
| Naoty Input Capacity | 21.7KVA |
| Cycle adidy naoty | 100%, 40° |
| Hery Factor | 0.82 |
| fahombiazana | 89,5% |
| Naoty fanapahana Current/Voltage | 125A/130V |
| Saran'ny fanitsiana ankehitriny | 30 - 125A |
| Arc - fomba fanombohana | Tsy mifandray |
| Manapaka entona | Air |
| Paramètres fanapahana kalitao (vy malefaka) | 25 (580mm/min) |
| Haben'ny fanapahana ambony indrindra (Vy malefaka) | 32 (400mm/min) |
| Fahaizana fanapahana ambony indrindra (Vy malefaka) | 38 (300mm/min) |
| Kilasy insulation | F |
| Ambaratonga fiarovana fiarovana | IP23S |
| Temperature Ambient | -10°C - 40°C |
| Paramètre fanampiny | |
| P80 fanapahana fanilo | Fanilo mangatsiaka 130A, tsingerin'ny adidy 60%. |
| Anti-collision | Fahamarinana fanarenana 0.1mm |
| Wire Feeding Tube Length | 1,8m |
| Cable lasantsy tsara | 3m (50mm²) |
| Cable welding ratsy | 3m (50mm²) |
| Cable Fanaraha-maso Wire Feeder | 5m |
| Operation Box | Miaraka amin'ny fiatoana vonjy maika, fanombohana, fiatoana, fampandehanana asa. Cable Length 5m, 2 Standard - fitaovana |
| Cable interconnection eo amin'ny kabinetra elektrika sy vatana lehibe | 5m |