Cinezela iBrake
CNC Laser
IRobhothi yoShishino
Umatshini wokuqengqeleka kwiPlate
Umatshini wokugoba umbhobho
ILathe kunye neziko loMatshini
Iimveliso zokuKhusela oomatshini
Iimveliso
Umatshini wokugoba ityhubhu CNC-3A-1S
I-POW® inikezela ngomatshini wokugoba umbhobho ozenzekelayo ozenzekelayo, kunye nenkqubo yokulawula i-PLC, ezimbini (okanye ezintathu okanye ngaphezulu) i-servo ye-rotary, ukutya (kunye nokugoba), iphaneli yesikrini sokuthinta ukubonisa isiNgesi, i-digridi ehlukeneyo yokugoba i-prefabricate, i-dialogue operation, inokukhetha i-manual, i-semi-automatic kunye ne-automatic full mode, i-pedal switch ephathekayo kunye nesiqalo kunye nomsebenzi wokuyeka ngokukhawuleza. Ii-axes ezininzi zisebenza ngaxeshanye.
Umatshini wokugoba ityhubhu CNC-4A-2S
I-POW® inikezela ngomatshini wokugoba umbhobho ozenzekelayo ozenzekelayo, kunye nenkqubo yokulawula i-PLC, ezimbini (okanye ezintathu okanye ngaphezulu) i-servo ye-rotary, ukutya (kunye nokugoba), iphaneli yesikrini sokuthinta ukubonisa isiNgesi, i-digridi ehlukeneyo yokugoba i-prefabricate, i-dialogue operation, inokukhetha i-manual, i-semi-automatic kunye ne-automatic full mode, i-pedal switch ephathekayo kunye nesiqalo kunye nomsebenzi wokuyeka ngokukhawuleza. Ii-axes ezininzi zisebenza ngaxeshanye.
Umatshini wokugoba ityhubhu CNC-5A-3S
I-POW® inikezela ngomatshini wokugoba umbhobho ozenzekelayo ozenzekelayo, kunye nenkqubo yokulawula i-PLC, ezimbini (okanye ezintathu okanye ngaphezulu) i-servo ye-rotary, ukutya (kunye nokugoba), iphaneli yesikrini sokuthinta ukubonisa isiNgesi, i-digridi ehlukeneyo yokugoba i-prefabricate, i-dialogue operation, inokukhetha i-manual, i-semi-automatic kunye ne-automatic full mode, i-pedal switch ephathekayo kunye nesiqalo kunye nomsebenzi wokuyeka ngokukhawuleza. Ii-axes ezininzi zisebenza ngaxeshanye.
Ukusika iLaser
| CRP-RH18-20 | ||
| Inani leezembe | 6 - ekseni | |
| Ukuphela - kwengalo Umthwalo wokuhlawula | 20KG | |
| Irediyasi esebenzayo | 1720mm | |
| Ubuninzi be-engile ye-Axis nganye | I-axis 1 | Ithe tye/Iguquliwe: - 167° - 167°, Udonga - lunyuswe: - 30° - 30° |
|
| I-axis 2 | 0 ° - 175 ° |
|
| I-axis 3 | - 80 ° - 150 ° |
|
| Umgca we-4 | - 190 ° - 190 ° |
|
| Umgca we-5 | - 105 ° - 130 ° |
|
| Umgca 6 | - 210 ° - 210 ° |
| Maximum Joint Speed | I-axis 1 | 159°/S |
|
| I-axis 2 | 159°/S |
|
| I-axis 3 | 159°/S |
|
| Umgca we-4 | 280°/S |
|
| Umgca we-5 | 240°/S |
|
| Umgca 6 | 520°/S |
| ITorque evumelekileyo | Umgca we-4 | 48N.m |
|
| Umgca we-5 | 48N.m |
|
| Umgca 6 | 28N.m |
| I-Inertia Torque evumelekileyo | Umgca we-4 | 1.8kg.m² |
|
| Umgca we-5 | 1.8kg.m² |
|
| Umgca 6 | 0.8kg.m² |
| Ukuphindaphinda | ± 0.08mm | |
| IrobhothiUbunzima | 285KG | |
| Indlela yokuFakela | Ithe tye/Ijikelelweyo/Indonga-ixhonyiwe | |
| Indawo yokusebenza | Ubushushu obugciniwe | 0 - 45°C |
|
| Ubuntu bezizalwane | 20 - 80% (Akukho ukuNxibelelana) |
| IP Rating | Irobhothi IP54, Isandla IP67 | |
