Cinezela iBrake
CNC Laser
IRobhothi yoShishino
Umatshini wokuqengqeleka kwiPlate
Umatshini wokugoba umbhobho
ILathe kunye neziko loMatshini
Iimveliso zokuKhusela oomatshini
TIG Autogenous Welding / Filler Wire Welding
UMDA WOKUSEBENZA
● Kwi-welding ye-autogenous: I-Carbon steel kunye nensimbi engenasici ngaphezu kwe-0.8 mm; i-aluminiyam kunye neentsimbi ezingenayo i-ferrous ngaphezu kwe-1.2 mm.
● Kwi-welding ye-filler: i-Carbon steel kunye nensimbi engenasici ngaphezu kwe-1.0 mm; aluminiyam
IIMBONAKALO
I-PARAMETER
| Irobhothi ye-CRP-RH14-10-W yokuWelding | |||
| Uhlobo lwengalo | Ezininzi ezithe nkqo-Idityanisiwe | ||
| Izidanga zeNkululeko yokuHamba | 6 - ekseni | ||
| Ubuninzi boMvuzo | 10KG | ||
| Max. Istroke | I-axis 1 | Ngaphambili - Inyuswe / ijikiwe: - 167° - 167°, Udonga - Inyuswe: - 30° - 30° | |
|
| I-axis 2 | 0 ° - 175 ° | |
|
| I-axis 3 | - 80 ° - 150 ° | |
|
| Umgca we-4 | - 190 ° - 190 ° | |
|
| Umgca we-5 | - 105 ° - 130 ° | |
|
| Umgca 6 | - 210 ° - 210 ° | |
| Max. Isantya | I-axis 1 | 169°/S | |
|
| I-axis 2 | 169°/S | |
|
| I-axis 3 | 169°/S | |
|
| Umgca we-4 | 280°/S | |
|
| Umgca we-5 | 240°/S | |
|
| Umgca 6 | 520°/S | |
| ITorque evumelekileyo | Umgca we-4 | 10N.m | |
|
| Umgca we-5 | 10N.m | |
|
| Umgca 6 | 3N.m | |
| I-Inertia Torque evumelekileyo | Umgca we-4 | 0.25kg.m² | |
|
| Umgca we-5 | 0.25kg.m² | |
|
| Umgca 6 | 0.05kg.m² | |
| Ukuphindaphinda Ukuchaneka kokubekwa | ±0.08mm | ||
| Ukufikelela okuphezulu | 1440mm | ||
| Ubunzima beRobhothi | 170KG | ||
| Indlela yokuFakela | Umgangatho - unyusiwe, uphahla - unyusiwe | ||
| Indawo yoFakelo | Ubushushu obugciniwe | 0 - 45°C | |
|
| Ubuntu bezizalwane | 20 - 80% (Non-Condensing) | |
|
| Ukungcangcazela | Ngaphantsi kwe-0.5G | |
|
| Abanye | Indawo yofakelo lwerobhothi kufuneka ibe kude: Kumanzi anokutsha okanye adlekayo okanye iigesi, imithombo yokuphazamiseka kombane. | |
| IP Rating | Umzimba werobhothi: IP54, Isandla: IP67 | ||
| Iimbonakalo | Ulwakhiwo olubambeneyo, isantya esiphezulu, ukuchaneka okuphezulu, ukwandiswa okuphezulu, kulula ukusebenza | ||
| Iimeko zeSicelo | Ukuwelda, ukusika, ukudibanisa, ukuphatha, ukumakisha, ukucola | ||
| I-CRP-E60-G4 Ikhabhinethi yoMbane | |
| Fundisa iPendant | I-8-intshi ye-TFT-i-LCD, ikhibhodi + isikrini sokuchukumisa, iswitsha yokukhetha imo, iswitshi yokhuseleko, iqhosha lokumisa likaxakeka, ubude bentambo 6m |
| Ugcino lomsebenzisi | 200M |
| Inani leezembe ezilawulwayo | I-6 + 2 izembe (i-6 - ulungelelwaniso olusemgangathweni lwe-axis, i-axes yangaphandle iyakhethwa) |
| Ujongano | Digital I/O Interface ，22-indlela igalelo / 22-indlela imveliso, COM yandiswa |
|
| I-4 - itshaneli 0 - 10V imveliso ye-analog, i-12 - bit echanekileyo, i-COM eyandisiweyo |
|
| I-Dual-interface ye-encoder yesignali yesitishi (yokulandelela indawo) |
|
| Ujongano lwe-Ethernet |
|
| Ujongano lwe-USB kabini |
| Iindlela zokuSebenza | Fundisa, dlala, ukude |
| Imisebenzi eshukumayo | Yalatha-kwi-point, i-linear, i-arc ejikelezayo |
| Inkqubo yomyalelo | Intshukumo, ingqiqo, inkqubo, izibalo |
| IiNkqubo zokuLungelelanisa | Ulungelelwaniso oludibeneyo, ulungelelwaniso lweCartesian, ulungelelwaniso lomsebenzisi, ulungelelwaniso lwesixhobo, ulungelelwaniso lwesiseko |
| Imisebenzi yoFundo olungaqhelekanga | Ukuyeka okungxamisekileyo, i-servo anomaly, i-anomaly yokulungelelaniswa komsebenzisi, isixhobo sokulungelelanisa i-anomaly, ukugcinwa kokhuseleko, i-arc - ukuqala ngokungaqhelekanga, njl. |
| Ukhuseleko kwiRobhothi | Ukumisa unxunguphalo lwangaphandle, ukuchasana nongquzulwano, ujongano lwepin yokhuseleko; I-loop yokhuseleko ye-MC, ukuthambisa i-servo, njl. |
| Reserved Dedicated Interfaces | Ujongano olukhethekileyo lwe-arc welding, i-workstation interfaces, i-Remote host - ujongano lwecala |
| IiPakethi zeSoftware | Ukuwelda / ukuphatha / ukupeyinta / ukupeyinta, njl. (ukhetho) |
| Abanye | Eyakhelwe-kwi-PLC, amandla-off recovery, i-encoder interface (ixhasa ibhanti ye-synchronous), ukulandelela i-arc kunye nezixhobo (ukhetho), isofthiwe yombono (ukhetho), isofthiwe yokulandelela i-laser (ukhetho), njl. |
| Intambo yoNxibelelwano phakathi kweKhabhinethi kunye noMzimba weRobhothi | 5m |
| Ukunikezwa Amandla | 3 - isigaba 380VAC 50 - 60HZ |
| Imilinganiselo | 550X785X410mm |
| Ubunzima | 65KG |
| I-WSME - 315R (Gcwalisa - ucingo) Umatshini wokuwelda | |
| Imo Yokulawula | Ulawulo lwe-Analog |
| I-Rated Input Voltage/Inombolo yeSigaba | Ezintathu - isigaba 380V AC ± 10%, 50HZ |
| Umthamo weNgeniso ulinganisiwe | 9.3KVA |
| Ulinganiso lomjikelo woMsebenzi (%) | 60 |
| Isiphumo Hayi - layisha iVoltage | 79 ± 4V |
| Isiphumo Uluhlu lwangoku | 5 - 320A |
| Ixabiso eliyiNcopho, iBalue eliSiseko, iNqanaba langoku, iArc - ukumisa, iArc - ukumisa uluhlu lwangoku | 5 - 320A |
| Ipesenti yoMjikelo woMsebenzi (%) | 15 - 85 |
| I-Pulse Frequency (HZ) | 0.2 - 999 |
| AC Frequency (HZ) | 40 - 250 |
| Ipesenti yokucoca (%) | - 50 - 40 |
| Amandla Factor | 0.95 |
| Inqanaba loKhuseleko lweNdawo | IP21S |
| Ubushushu obugciniwe | - 10°C - 40°C |
| I-WSME - 315R (I-Autogenous Welding) Umatshini wokuwelda | |
| Imo Yokulawula | Ulawulo lwe-Analog |
| I-Rated Input Voltage/Inombolo yeSigaba | Ezintathu - isigaba 380V AC ± 10%, 50HZ |
| Umthamo weNgeniso ulinganisiwe | 9.3KVA |
| Ulinganiso lomjikelo woMsebenzi (%) | 60 |
| Isiphumo Hayi - layisha iVoltage | 79 ± 4V |
| Isiphumo Uluhlu lwangoku | 5 - 320A |
| Ixabiso eliyiNcopho, iBalue eliSiseko, iNqanaba langoku, iArc - ukumisa, iArc - ukumisa uluhlu lwangoku | 5 - 320A |
| Ipesenti yoMjikelo woMsebenzi (%) | 15 - 85 |
| I-Pulse Frequency (HZ) | 0.2 - 999 |
| AC Frequency (HZ) | 40 - 250 |
| Ipesenti yokucoca (%) | - 50 - 40 |
| Amandla Factor | 0.95 |
| Inqanaba loKhuseleko lweNdawo | IP21S |
| Ubushushu obugciniwe | - 10°C - 40°C |